Gp Hot Selling Power Amplifier Professional Amplifier Module for Full Range Speaker

• Usage: Hi-Fi
• Type: Professional Amplifier
• Used: Professiona
• Power Supply: AC220-230V 50Hz
• S/N Ratio: ≥98dB
• Transport Package: Carton or Fight Case Packing
• Model NO.: MX-GP
• Specification: Metal
• Trademark: MingXuan
• Origin: Guangdong, China
• Production Capacity: 50000

Product Description

Product Description

Power Amplifier for Full Range Speaker

Technical paraneter of GP series amplifier:Front panel: GP2/GP3/GP4/GP5/GP6 GP6 GP2Q/GP3Q/GP4Q 1. Mains Power Switch When press the switch, the soft start circuit run for avoiding surge strike. In about 3-4 seconds, there will be a clicking denote that soft start finished. And more 1-2 seconds...
 

Front panel:

GP2/GP3/GP4/GP5/GP6

1. Mains Power Switch

When press the switch, the soft start circuit run for avoiding surge strike. In about 3-4 seconds, there will be a clicking denote that soft start finished. And more 1-2 seconds later, there will be another "clicking", the amplifier is connected with speaker and ready to work.

2. CH-1/CH-2(CH-3/CH-4) Input level control

Adjust it to get the volume desired.

3.  CH-1/CH-2(CH-3/CH-4)Clip indicating LED

Turns on just before the maximum, distortion free, output level of the amplifier. The clip LEDs may turn on shortly from time to time but they may certainly not turn on for longer periods. In this case you have to turn the output level down!

4.  CH-1/CH-2(CH-3/CH-4)Protection indicating LED

These LEDs will light up when the amplifier is running un-stable or went in to thermal protection after the power elements temperature over 90ºC.

5.  CH-1/CH-2(CH-3/CH-4)Signal LED

The signal led indicates that a music signal is present at this channel input.

6.  Parallel mode indicating LED

Indicate that the amplifier is working under parallel mode, the indicator is lighten, input signal only acts on CH-1.

7.  CH-1/CH-2(CH-3/CH-4)Bridge mode indicating LED

When the amplifier is working under BRIDGE mode, the indicator is lighten , and the input signal only acts on CH-1(CH-3)

REAR PANEL:

GP1/GP2/GP3/GP4

1. Mains Power Supply Cord

2. CH-1/CH-2(CH-3/CH-4 1/4"JACK input  connector

Used by 1/4"standard connector,. You can us unbalanced or  balanced input jack.

Tip: signal  +     Ring: signal -    Sleeve: ground 

3. CH-1/CH-2(CH-3/CH-4) XLR input connector

Standard XLR (male) socket for input signal link, its Pins parallel connected with the 1/4"JACK so you can  feed the same signal to another amplifier.   Pin1: signal ground,  Pin2: signal+,  Pin3: signal-

4.CH1/CH-2(CH-3/CH-4) SPEAKON output

Used by a standard SPEAKON connector. 

5. INPUT sensitivity switch.

With this switch you can perfectly adapt the input sensitivity of the amplifier:0.77V;26dB or 1.4V.

6. Output Mode Set Switch.

Select the run mode as STEREO or BRIDGE or PARALLEL.

7.CH1/CH-2(CH-3/CH-4) binding post output

Used by a standard binding connector. 
                                                                 

Company Information

Branch Company - Guangzhou MingXuan Audio Co., Ltd was established in 2012. Mingxuan Audio is focus on high quality audio products such as speaker, amplifier, mixer, microphone, especially outdoor high-power active speakers.

There are professional design team, sales team, customer service team and technical team to service all customer . Based on high quality & competitive prices & better service, our products have entered the Americas, Europe, Asia, Africa markets successfully, such as USA, Canada, UK, Germany, France, Singapore, Japan, Nigeria etc, and get good feedback.
 

Our Service

1. Provide professional person to communicate with you before the order.
2. Provide strict quality check for each part, each process before export.
3. Provide optimum system solution based on each client's specific requirement.
4. Provide complete post-sale service, including installation, technical guide and training.

Packaging & Shipping

You can choose flight case packing

FAQ

Q: Do you offer guarantee for the products?
A: Yes, we offer 2  years warranty to our products.
                                                                    
Q:What is your product range?
A:We are mainly offer all kind of stage lighting and audio-visual equipment etc.

Q: Can you help me to print our logo or company name on the products or package?
A: Of course. Your logo can be printed on the products or package.
     
Q: If the products broken during the warranty, what should I do?
A: If there is a problem with the products, please describe it and send videos or pictures to us to analyze. Then we will guide you how to fix it and provide spare parts on free if needed.